Atmos Wiki

User Tools

Site Tools

Trace: • software_details
atmos:northpolradar:work_log

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
atmos:northpolradar:work_log [2026/07/31 17:54] – benjamin.guidaatmos:northpolradar:work_log [2026/08/17 17:52] (current) – benjamin.guida
Line 26: Line 26:
  
 2026/7/31 Several attempts were made to get the RVP8 running again this morning. After the initial power on the RVP was pingable from radar1 but IRIS still reported no DSP connection. After running  several test codes while sshed into RVP it hit an error that it could not interact with the IO card. The RVP was then rebooted but now the IFD lights refused to turn on. The RAM was reseated again, and all cable connections were checked. The RVP still is unable to boot, and connected monitor showed no input. The RVP is currently powered off and another attempt will be made on Monday to start the RVP8. 2026/7/31 Several attempts were made to get the RVP8 running again this morning. After the initial power on the RVP was pingable from radar1 but IRIS still reported no DSP connection. After running  several test codes while sshed into RVP it hit an error that it could not interact with the IO card. The RVP was then rebooted but now the IFD lights refused to turn on. The RAM was reseated again, and all cable connections were checked. The RVP still is unable to boot, and connected monitor showed no input. The RVP is currently powered off and another attempt will be made on Monday to start the RVP8.
 +
 +2026/8/15 The new Jump Station was installed by UND IT allowing ethernet connection and faster data transfer. It also allows a more secure connection to outside computers.
atmos/northpolradar/work_log.1785520462.txt.gz · Last modified: 2026/07/31 17:54 by benjamin.guida