Differences

This shows you the differences between two versions of the page.

--- atmos:citation:instruments:buildelectricfieldmills:home [2026/07/09 18:39] – created delene
+++ atmos:citation:instruments:buildelectricfieldmills:home [2026/08/04 16:20] (current) – halmos
@@ Line 2: / Line 2: @@
 ===== Features =====
+===== Github REPO with Instructions =====
+  * https://github.com/ArcAttack/FieldMill-PCB
+===== Log =====
+  * 8/4/26 - Circuit boards have arrived. Looked into SMD soldering and will need more solder, and a thin tip for the soldering iron. ESP32 board was a 38 pin instead of a 30 pin, so replacement part is being ordered and previous board is being returned. Looking into re-printing casing with ASA.
+  * 7/17/26 - Parts have been inventoried. Still waiting on CAP ALUM 330UF 20% 35V RADIAL and RES SMD 22K OHM 1% 1/8W 0805. Email sent to Shelby to order both the ESP32 dev-kit and M2 standoffs and screws. Waiting on those to arrive.
+  * 7/9/26 - Parts arrived from digikey. Shelby informed that two parts are on backorder. Waiting for 3D Printed parts as well as PCB's. Will inventory available parts next week. - Jacob Halmos.
+===== Parts List =====
+===== To-do =====
+  * Order PCB's
+  * Order ESP32 Dev-Kit
+  * Order M2 standoffs and screws* (see note)
+       * four a few mm long, plus 2 >20mm that will be cut apart
+  *3D print parts