https://atmoswiki.azurewebsites.net/ 2026-04-19T18:23:59+00:00 https://atmoswiki.azurewebsites.net/ https://atmoswiki.azurewebsites.net/lib/exe/fetch.php?media=wiki:favicon.ico text/html 2020-01-29T17:25:48+00:00 Anonymous (anonymous@undisclosed.example.com) https://atmoswiki.azurewebsites.net/doku.php?id=atmos:citation:instruments:nevzorov:home&rev=1580318748&do=diff Nevzorov Water Content Probe * Description: Nevzorov Total and Liquid Cloud Water Content Probe * Manufacturer: Sky Tech Research/ * Model: Unattended Version * Serial Number: (Control Box doesn't have a S/N) * Point of Contact: Alexei Korolev (Science), Sergey Timonin (Technical) text/html 2020-01-29T17:25:48+00:00 Anonymous (anonymous@undisclosed.example.com) https://atmoswiki.azurewebsites.net/doku.php?id=atmos:citation:instruments:nevzorov:instrument_log&rev=1580318748&do=diff Nevzorov Instrument Log * December 5, 2015. During the OLYMPEX NASA project flight on December 5, 2015, the monitor for the LWC side of the probe failed. * December 1, 2015. During the OLYMPEX NASA project flight on December 1, 2015, the monitor for the LWC side of the probe failed. The sensor head was replaced with SN 370 before the December 3, 2015 flight. text/html 2020-01-29T17:25:48+00:00 Anonymous (anonymous@undisclosed.example.com) https://atmoswiki.azurewebsites.net/doku.php?id=atmos:citation:instruments:nevzorov:nevzorov_problems_and_solutions&rev=1580318748&do=diff Nevzorov Problems and Solutions OLYMPEX 2015 Cause and Problem During the December 1, 2015 flight, the monitor on the Liquid Water Content (LWC) side of the Nevzorov Probe failed. The sensor head (SN369) was replaced with SN 370 sensor head. After approximately 10 hours of flying, on the December 5, 2015 flight, SN370 sensor head failed. Connectivity checks are preformed on the failed heads (SN369 and SN370) and compared to a new working sensor head (SN371). Below is a handy diagram made … text/html 2020-01-29T17:25:48+00:00 Anonymous (anonymous@undisclosed.example.com) https://atmoswiki.azurewebsites.net/doku.php?id=atmos:citation:instruments:nevzorov:set_temp&rev=1580318748&do=diff Set Temperature for Nevzorov Probe Overview The Nevzorov probe can be set to three different temperature settings (70.0 C, 90.0 C, and 110.0 C). The higher the temperature the probe is set to, the higher water content the probe can measure before the probe becomes saturated. The 70.0 C setting is used for ground testing.