atmos:tripod:home
Table of Contents
Tripod Instrumentation Meteorological Measurement System (TIMMS)
TIMMS-SN00200
Summary
- Deployed Location: Clifford Hall 423
- Deployed Position:
- Deployed Date: March 14, 2024
Instruments Installed
- Anydesk (875 427 442)
Temp/Humidity Setup Via A/D Board
- Uses a Digilent MCC 118 - 12-Bit, 8-Channel Voltage Measurement DAQ HAT for Raspberry Pi
USB Webcam
TIMMS-SN00100
Summary
- Deployed Location: Gorman Field Small UAS Airport, Emerado, ND
- Deployed Position: Latitude 47 50' 55.13“, Longitude 97 20' 54.14”
- Deployed Elevation: 932ft (estimated with Google Earth)
- Deployed Date: December 12, 2023.
- Anydesk (562 750 981)
Available Variables
- Visibility
- Wind Speed
- Station Pressure
- Altimeter Setting
- Temperature
- Relative Humidity
Source Code
- The data displayed on Grafana is coming from a python script that is titled IMetXQ2_tri.py. To change this code, connect to the Anydesk listed above.
Instruments Installed
Initial Raspberry Pi Setup
Pi Camera Setup
Use this section if you are using the official pi camera that plugs directly into the board
USB Camera Setup
Setting up the camera to take a picture automatically
- The ADPAA scripts save-img.sh and transfer+remove.sh are run by crontab to acquire and transfer images.
Setting up a new TIMM
Meteorological Measurements Setup
Acquisition is provided on the Raspberry Pi using the python program of IMetX!2_try.py, SenMiniOFS_tri.py and YoungAnem_tri.py. These three programs have been added to ADPAA software package. The data goes into the CORDS/Granafa system, see [http://3.89.34.59:3000/d/rDMMs_T4k/tripod?orgId=1&from=1709890079217&to=1709933279217]
atmos/tripod/home.txt · Last modified: 2025/05/14 18:33 by halmos