Atmos Wiki

Interest in the surface measurement instrument. Interested in probe flow modeling and ground electric field mills.

1. TIMMS-00400
   1. Raspberry Pi
      1. Connect Temperature and Humidity Sensor
      2. Read manual for fluxgate compass and determine connection to Raspberry Pi
      3. Set USB Devices on TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot
   2. Record hardware and software for TIMMS (Documentation)
   3. Pressure Transducer - find one to buy (cheap, highest accuracy)
      1. Young, Campbell
      2. Must connect to A/D board
      3. Research SPI and IC2 interface
2. Sodder new charging port on iMet-XQ2
   1. Find type (read manual) and order
3. Look into how to label small wires
4. Rain Gauges (Tipping Buckets)
   1. Wire Rain and fog gauges
5. Program TippingBucket-SN00100 or Rain-SN00100 (Confirm with Dr. Delene which one)
6. Wire Aerosol to Power Control Device

• TIMMS -
• iMet-XQ2 - The ones we have work, but we'd have to flip the orientation. Could do it.
• Wires- could buy wire shrink printer, cheapest around 30-50 dollars, regular around 100-300. Otherwise buy smaller tape for the label maker, and just make it work.
• Rain Gauges -
• Tipping Bucket Programming -
• Aerosol Particle Sizer -

1. TIMMS-00400
   1. Raspberry Pi
      1. Connect Temperature and Humidity Sensor
      2. Read manual for fluxgate compass and determine connection to Raspberry Pi
      3. Set USB Devices on TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot
   2. Record hardware and software for TIMMS (Documentation)
   3. Pressure Transducer - find one to buy (cheap, highest accuracy)
      1. Young, Campbell
      2. Must connect to A/D board
      3. Research SPI and IC2 interface
2. Sodder new charging port on iMet-XQ2
   1. Find type (read manual) and order
3. Look into how to label small wires
4. Rain Gauges (Tipping Buckets)
   1. Set up second Raspberry Pi
   2. Wire Rain and fog gauges
5. Program TippingBucket-SN00100 or Rain-SN00100 (Confirm with Dr. Delene which one)
6. Wire Aerosol to Power Control Device

• TIMMS - connected wires for temperature and humidity sensors, examined ADPAA and installed
• iMet-XQ2 - DNW
• Wires- DNW
• Rain Gauges - Finished Cleaning
• Tipping Bucket Programming - DNW
• Aerosol Particle Sizer - DNW

1. TIMMS-00400
   1. Raspberry Pi
      1. Connect Temperature and Humidity Sensor
      2. Read manual for fluxgate compass and determine connection to Raspberry Pi
      3. Set USB Devices on TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot
   2. Record hardware and software for TIMMS (Documentation)
2. Sodder new charging port on iMet-XQ2
   1. Find type (read manual) and order
3. Look into how to label small wires
4. Rain Gauges (Tipping Buckets)
   1. Set up second Raspberry Pi
   2. Wire Rain and fog gauges
5. Program TippingBucket-SN00100 or Rain-SN00100 (Confirm with Dr. Delene which one)
6. Resolve AnyDesk Conflict on TIMMS-SN00400
7. Wire Aerosol to Power Control Device

• TIMMS - DNW
• iMet-XQ2 - DNW
• Wires- DNW
• Rain Gauges - Cleaned
• Tipping Bucket Programming - DNW
• Resolved AnyDesk Conflict on TIMMS-SN00400

1. TIMMS-00400
   1. Raspberry Pi
      1. Connect Temperature and Humidity Sensor
      2. Read manual for fluxgate compass and determine connection to Raspberry Pi
      3. Set USB Devices on TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot
   2. Record hardware and software for TIMMS (Documentation)
2. Sodder new charging port on iMet-XQ2
3. Find Wire labels
4. Rain Gauges (Tipping Buckets)
   1. Set up second Raspberry Pi
   2. Wire Rain and fog gauges
5. Program TippingBucket-SN00100 or Rain-SN00100 (Confirm with Dr. Delene which one)
6. Update MAC addresses on Google Sheet “Computer-Access” for RAIN-SN00100, TippingBucket-SN00100, Electric Field Mill (E100), and CH601-Sonic
7. Resolve AnyDesk Conflict on TIMMS-SN00400

• TIMMS - did not work on (DNW)
  • Check if must ID for current devices (keyboard, mouse) w/ Dr. Delene
• Did not have correct charging ports for iMet-XQ2 - Check w/ Dr. Delene
• Wire labels - talk to Dr. Delene
• Rain Gauges - Fastened one AC plug
• Tipping Bucket - DNW
• Updated all listed MAC addresses
• Did not resolve AnyDesk Conflict on TIMMS-SN00400 :(

1. TIMMS-00400
   1. Raspberry Pi
      1. Connect Temperature and Humidity Sensor
      2. Read manual for fluxgate compass and determine connection to Raspberry Pi
      3. Set USB Devices on TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot
   2. Record hardware and software for TIMMS (Documentation)
2. Sodder new charging port on iMet-XQ2
3. Find Wire labels
4. Rain Gauges
   1. Set up second Raspberry Pi
   2. Wire Rain and fog gauges

• Will USB identification build into TIMMS-00400 - Check if must do for current devices w/ Dr. Delene
• TIMMS - did not work on (DNW)
• Did not have correct charging ports for iMet-XQ2 - Check w/ Dr. Delene
• Wire labels - talk to Dr. Delene
• Built 3D printed catching apparatus, wired one AC plug

1. Create TIMMS-00400
   1. Set up Raspberry Pi
      1. Connect Temperature and Humidity Sensor to Raspberry Pi
      2. Read manual for fluxgate compass and determine connection to Raspberry Pi
2. Set USB Devices on TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot
3. Record hardware and software for TIMMS
4. Set up second Raspberry Pi
5. Sodder new charging port on iMet-XQ2
6. Find Wire labels

• Will USB identification build into TIMMS-00400 - Check if must do for current devices w/ Dr. Delene
• TIMMS-SN00400 - worked on reboot and usb connections
• Set up Second Raspberry Pi
• did not have correct charging ports for iMet-XQ2 - Check w/ Dr. Delene
• Wire labels - talk to Dr. Delene

1. Create TIMMS-00400
   1. Set up Raspberry Pi
      1. Connect Temperature and Humidity Sensor to Raspberry Pi
      2. Read manual for fluxgate compass and determine connection to Raspberry Pi
2. Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot
3. Download and Access ADPAA Repository on personal laptop and Raspberry Pi and record methods
   1. Add SVN software, record how to download software and ADPAA
4. Record hardware and software for TIMMS
5. Update Clifford Hall Combined Grafana page to look like Gorman Field Grafana page

• Will remotely access TIMMS-00300 to properly identify devices
  • Must wait for Wi-Fi to TIMMS-00300
  • Will build into TIMMS-00400
• Finished ADPAA and SVN Client page
• TIMMS-SN00400 - No progress
• Explored Grafana - task will be put on “back burner” for times when other work must be placed on pause.

• Acquired power strip for camera box, 4 adapters

1. Create TIMMS-00400
   1. Set up Raspberry Pi
      1. Connect Temperature and Humidity Sensor to Raspberry Pi
      2. Read manual for fluxgate compass and determine connection to Raspberry Pi
2. Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot
3. Download and Access ADPAA Repository on personal laptop and Raspberry Pi and record methods
   1. Add SVN software, record how to download software and ADPAA
4. Record hardware and software for TIMMS
5. Update Clifford Hall Combined Grafana page to look like Gorman Field Grafana page

• Will remotely access TIMMS-00300 to properly identify devices
  • Must wait for Wi-Fi to TIMMS-00300
  • Will build into TIMMS-00400
• Began working on ADPAA and SVN client, documentation started, client downloaded
• TIMMS-SN00400 - need to access ADPAA first
• Explored Grafana - task will be put on “back burner” for times when other work must be placed on pause.

• Met with Dr. Delane to discuss progress
• Acquired 3D anemometer and USB Camera

1. Create TIMMS-00400
   1. Find Raspberry pi box (shell around computer for protection/looks)
   2. Connect Temperature and Humidity Sensor to Raspberry Pi
   3. Read manual for fluxgate compass and determine connection to Raspberry Pi
   4. Set up Raspberry Pi
2. Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot
3. Download and Access ADPAA Repository on personal laptop and Raspberry Pi and record methods

• Will remotely access TIMMS-00300 to properly identify devices
  • Must wait for Wifi to TIMMS-00300
  • Will build into TIMMS-00400
• TIMMS-00400
  • Emailed Wanda to order Raspberry Pi Box
  • Read manual for temperature and humidity sensor and discovered more documentation must be added.
    • Will look at ADPAA to see what past TIMMS set-ups have been
    • RECORD FINDINGS
  • No progress read fluxgate compass manual
  • Continued setting up Raspberry Pi
    • Got through Initial Raspberry Pi Setup Instructions
    • Next - Properly connect USB Camera (nearly done), connect temperature and humidity sensor
• Began looking into downloading ADPAA
  • Must install SVN client
  • RECORD ALL FINDINGS

• Met with Dr. Delane to discuss progress
• Acquired pressure sensor exterior and Fluxgate Compass
• Raspberry Pi SD card was set up

1. Create TIMMS-00400
   1. Find Raspberry pi box (shell around computer for protection/looks)
   2. Connect Temperature and Humidity Sensor to Raspberry Pi
   3. Read manual for fluxgate compass and determine connection to Raspberry Pi
   4. Set up Raspberry Pi
2. Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot

• Will remotely access TIMMS-00300 to properly identify devices
  • Must wait for Wifi to TIMMS-00300
  • Will build into TIMMS-00400
• TIMMS-00400
  • No progress Raspberry Pi box
    • New task
  • No progress connect temp and humidity
    • New task
  • No progress read fluxgate compass manual
    • New task
  • Began setting up Raspberry Pi
    • Got through step 4 on Initial Raspberry Pi Setup Instructions
      • Maybe through 5? Will investigate further.
    • Set timezone and preferences
  • Updated Wiki pages throughout progress for future reference
    • Updated TIMMS-00400 for new parts

• Met with Dr. Delane to discuss progress
• added more parts to list for TIMMS-00400
  • Pressure Transducer
  • DAQ HAT
  • MicroSD Card
  • USB Camera
  • Ultrasonic 3D Anemometer
  • Radiation shield for temperature and humidity sensor
• Will update TIMMS-00400 wiki entry

1. Create TIMMS-00400
2. Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot

• Will remotely access TIMMS-00300 to properly identify devices
  • Must wait for Wifi to TIMMS-00300
  • Will build into TIMMS-00400
• Connected Monitor to Raspberry Pi
• Found proper power connection for Raspberry Pi
• Updated TIMMS-00400 wiki entry

• Remote Work

1. Create TIMMS-00400
2. Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot

• Will remotely access TIMMS-00300 to properly identify devices
  • Will build into TIMMS-00400
• Looked into Raspberry Pi configuration and set up
• Read instrument manuals for ultrasonic anemometer and temperature and humidity sensor.

• Received box for TIMMS-00400

1. Create TIMMS-00400
2. Connect to Littlestorm
3. Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot

• Will remotely access TIMMS-00300 to properly identify devices
  • Will build into TIMMS-00400
• Connected to Littlestorm
• Analyzed new components for TIMMS-00400

• Met with Dr. Delane
  • Accessed ndus vpn instead of und vpn to connect to Littlestorm
  • Received numerous components to continue building TIMMS-00400

1. Create TIMMS-00400
2. Connect to Littlestorm
3. Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot

• Will remotely access TIMMS-00300 to properly identify devices
  • Will build into TIMMS-00400
• Waiting on email to finish connecting to Littlestorm
• Began setting up Raspberry Pi for TIMMS-00400
  • Set up mouse and keyboard
  • Looked at power supply and video output ports
  • need USBC for power supply
    • Found cord that worked
    • Does not have large wall adapter, as recommended by Dr. Delane.
    • Look into finding a cord with USBC connection and large adapter
  • Need micro-hdmi for video
    • On order

• Remote Work

1. Create TIMMS-00400
   1. Parts List
2. Connect to Littlestorm
3. Connect to Grafana
4. Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot

• TO BE ADDRESSED AT NEXT MEETING (compilation)
  • Unable to connect to Littlestorm
  • Parts Uncertainty
    • Camera (which type)
    • Correct model of ultrasonic anemometer
    • Box (Camera or square)
    • UNUSED components (verify)
      • Pressure Transducer
      • DAQ HAT
      • Visibility Sensor
      • iMet-XQ2 UAV Sensor
      • Web Cam
• DETAIL
  • Unable to connect to Littlestorm (connection timeout error)
    • Address at next meeting with Dr. Delane
  • Connected to Grafana
  • Parts List Progress
    • Collected wiki articles on instruments, TIMMS, and the MetTrailer
    • Began compiling more parts
      • Raspberry Pi 4B
      • Temp/Humidity Sensor
      • Tripod
      • Camera (USB or Pi cam)
      • Ultrasonic anemometer (Young Ultrasonic Anemometer Model 81000)
      • Camera Box or electrical box
      • NOT being used
        • Pressure Transducer
        • DAQ HAT
        • Visibility Sensor
        • iMet-XQ2 UAV Sensor
        • Web Cam
  • Set USB devices
    • Searched through wiki and online for guides
    • Found and recorded methods of assigning port identifiers for specific devices
      • Consult with Dr. Delane on updating TIMMS-00300, as it is deployed at the Glacial Ridge Field Site
    • Save records for application on TIMMS-00400

• Have Wiki account and can edit things.
• Order videos, comment monitor up the Raspberry Pi.

1. Create TIMMS-00400
   1. Parts List
2. Connect to Littlestorm
3. Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot

• Unable to connect to Littlestorm (connection timeout error)
• Parts List Progress
  • Raspberry Pi 4B
  • Temp/Humidity Sensor
  • Tripod
• Created Sourceforge account
• Accessed Chords (data website)
• Created Zotero account
• Unable to access Grafana
• Downloaded ADPAA
• Collected atmos wiki sites for task 3, no other progress

• Asked John Wold to give Ashley a Wiki account.
• Suggest working on a temperate/sonic wind/ camera for the MetTrailer tower.
• Suggest making a TIMMS-00400 for the lower tower on the MetTrailer.
• Meeting next week, 9 am check-in

• Create TIMMS-00400
  • Parts List
• Connect to Littlestorm

• Unable to connect to Littlestorm (connection timeout error)
• Parts List Progress
  • Raspberry Pi 4B
  • Temp/Humidity Sensor