Atmos Wiki

Interest in the surface measurement instrument. Interested in probe flow modeling and ground electric field mills.

• Received box for TIMMS-00400

1. Create TIMMS-00400
2. Connect to Littlestorm
3. Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot

• Will remotely access TIMMS-00300 to properly identify devices
  • Will build into TIMMS-00400
• Connected to Littlestorm
• Analyzed new components for TIMMS-00400

• Met with Dr. Delane
  • Accessed ndus vpn instead of und vpn to connect to Littlestorm
  • Received numerous components to continue building TIMMS-00400

1. Create TIMMS-00400
2. Connect to Littlestorm
3. Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot

• Will remotely access TIMMS-00300 to properly identify devices
  • Will build into TIMMS-00400
• Waiting on email to finish connecting to Littlestorm
• Began setting up Raspberry Pi for TIMMS-00400
  • Set up mouse and keyboard
  • Looked at power supply and video output ports
  • need USBC for power supply
    • Found cord that worked
    • Does not have large wall adapter, as recommended by Dr. Delane.
    • Look into finding a cord with USBC connection and large adapter
  • Need micro-hdmi for video
    • On order

• Remote Work

1. Create TIMMS-00400
   1. Parts List
2. Connect to Littlestorm
3. Connect to Grafana
4. Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot

• TO BE ADDRESSED AT NEXT MEETING (compilation)
  • Unable to connect to Littlestorm
  • Parts Uncertainty
    • Camera (which type)
    • Correct model of ultrasonic anemometer
    • Box (Camera or square)
    • UNUSED components (verify)
      • Pressure Transducer
      • DAQ HAT
      • Visibility Sensor
      • iMet-XQ2 UAV Sensor
      • Web Cam
• DETAIL
  • Unable to connect to Littlestorm (connection timeout error)
    • Address at next meeting with Dr. Delane
  • Connected to Grafana
  • Parts List Progress
    • Collected wiki articles on instruments, TIMMS, and the MetTrailer
    • Began compiling more parts
      • Raspberry Pi 4B
      • Temp/Humidity Sensor
      • Tripod
      • Camera (USB or Pi cam)
      • Ultrasonic anemometer (Young Ultrasonic Anemometer Model 81000)
      • Camera Box or electrical box
      • NOT being used
        • Pressure Transducer
        • DAQ HAT
        • Visibility Sensor
        • iMet-XQ2 UAV Sensor
        • Web Cam
  • Set USB devices
    • Searched through wiki and online for guides
    • Found and recorded methods of assigning port identifiers for specific devices
      • Consult with Dr. Delane on updating TIMMS-00300, as it is deployed at the Glacial Ridge Field Site
    • Save records for application on TIMMS-00400

• Have Wiki account and can edit things.
• Order videos, comment monitor up the Raspberry Pi.

1. Create TIMMS-00400
   1. Parts List
2. Connect to Littlestorm
3. Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot

• Unable to connect to Littlestorm (connection timeout error)
• Parts List Progress
  • Raspberry Pi 4B
  • Temp/Humidity Sensor
  • Tripod
• Created Sourceforge account
• Accessed Chords (data website)
• Created Zotero account
• Unable to access Grafana
• Downloaded ADPAA
• Collected atmos wiki sites for task 3, no other progress

• Asked John Wold to give Ashley a Wiki account.
• Suggest working on a temperate/sonic wind/ camera for the MetTrailer tower.
• Suggest making a TIMMS-00400 for the lower tower on the MetTrailer.
• Meeting next week, 9 am check-in

• Create TIMMS-00400
  • Parts List
• Connect to Littlestorm

• Unable to connect to Littlestorm (connection timeout error)
• Parts List Progress
  • Raspberry Pi 4B
  • Temp/Humidity Sensor