Table of Contents
RVP8
The RVP8 is the radar receiver and is located in the radome on top of Clifford Hall on the University of North Dakota Campus.
Installed
January 2003
Info
Manufacturer: Sigmet (Vaisala)
Computer Component: Custom built by Chassis Plans, LLC
Motherboard: SLE S5891-xxx
Description: The RVP8 is the receiver portion of the radar system. It is part of the Antenna Mounted Receiver (AMR) unit.
Location: Mounted to the antenna in the radome on top of Clifford Hall.
RDA Software Info
Install Date: June 2010
RDA Version: 8.11.0
OS Release: 2.6.18-8.el5
Hardware Maintenance
February 2010 - Replaced cooling fan
NOTES
June 2010 - After several attempts at upgrading the OS and software on the entire system, it was determined that the RVP8 can not function with RHEL version greater than 5.0 (currently installed). Also, it was determined that the IRIS/RDA version can not exceed 8.11.0 (currently installed). There were several attempts at getting IRIS/RDA 8.12.5 to work, but it only uncovered a bug in SIGMETS design that prohibits those versions from working on our system. This is because UND's RVP8 was designed with two IFDs and two computer RX boards (one to each IFD). This design was discontinued shortly after installation and all Sigmet software is based on a RVP8 configuration with one IFD and one RX board. The only way to upgrade OS and/or software is to upgrade the RVP8. This could include getting a new (or refurbished) RVP8 or just getting a new IFD and RX board (~$16,000).