Radar1 and Radar2 are connected to the University network through radarpi where it takes the local radar analysis network and masquerades them through the pi, and by an ssh into radarpi, you can ssh into either radar computers. Due to the University network settings you must also ssh to radarpi through littlestorm and be connected to the UND VPN.

You —> Littlestorm —> radarpi network —> Radar1/2

Through this you could also connect to the RVP8 or the RCP8 as needed.

You can manually ssh from one machine to another.
Assuming you started at littlestorm.

ssh radarpi@10.227.194.19
ssh radar2

The config file is setup for operator@radar2 to be radar2
The password for radarpi is available from the radarpi page
Use the radar2 operator password given to you.

To ssh from your machine to radar2 in one command you can set up a ProxyJump by editing your config file in .ssh
if you don't have a .ssh file, create one.

mkdir -p .ssh

then edit/create a text file named config to create Hosts

nano config

in config you can set up Hosts that allow you to shorten your ssh command. for example

Host littlestorm
  HostName littlestorm.atmos.und.edu
  User firstname.lastname

adding ProxyJumps allows your ssh command to jump through a machine, and allows us to jump from our local machine directly to radar2
Paste the following into your .ss/config file to be able to ssh into radar2 by typing ssh radar2

Host radar2
  HostName 192.168.50.2
  User operator
  KexAlgorithms +diffie-hellman-group1-sha1,diffie-hellman-group14-sha1
  HostKeyAlgorithms +ssh-rsa
  PubkeyAcceptedAlgorithms +ssh-rsa
  Ciphers +aes128-cbc,aes256-cbc
  ProxyJump littlestorm,radarpi
Host radarpi
  HostName 10.227.194.19
  User radarpi
  ProxyJump littlestorm
Host littlestorm
  HostName littlestorm.atmos.und.edu
  User firstname.lastname