atmos:citation:instruments:setup_dracal_usb_barometer:home
This is an old revision of the document!
Setting up the Dracal USB Barometer
Manual: Dracal USB Barometer Manual
Parts
The Dracal USB Barometer has only one component: the USB stick itself.
Setting up the Probe
By now, you should have your Raspberry Pi computer completely set up, with a DAQ HAT. To continue, you will need:
- the USB barometer
- Go to linnk and follow the setup instructions. Make sure you place all the files it requires you to download into the same directory that your coding script for your instrument is.
- For example:
my_home_directory
- Note that if you are using python, you should change the directory name from “DracalView_3.4.5” to “DracalView_3_4_5” to allow python to function.
- If you have properly set up the ADPAA and DAQ HAT, you can now run the python program that coincides with your instrument and observe the data.
atmos/citation/instruments/setup_dracal_usb_barometer/home.1771549625.txt.gz · Last modified: 2026/02/20 01:07 by ashley.vos