atmos:tripod:home

Table of Contents

Tripod Instrumentation Meteorological Measurement System (TIMMS)
- TIMMS-SN00200
- TIMMS-SN00100

Tripod Instrumentation Meteorological Measurement System (TIMMS)

TIMMS-SN00200

Summary

Deployed Location: Clifford Hall 423
Deployed Position:
Deployed Date: March 14, 2024

Instruments Installed

R.M. Young 81000 3 Axis Sonic Anemometer
Anydesk (875 427 442)

Temp/Humidity Setup Via A/D Board

Uses a Digilent MCC 118 - 12-Bit, 8-Channel Voltage Measurement DAQ HAT for Raspberry Pi

USB Webcam

TIMMS-SN00100

Summary

Deployed Location: Gorman Field Small UAS Airport, Emerado, ND
Deployed Position: Latitude 47 50' 55.13“, Longitude 97 20' 54.14”
Deployed Date: December 12, 2023.
Lab Book
Anydesk (562 750 981)

Initial Raspberry Pi Setup

* Raspberry Pi Inital Setup Wiki

Pi Camera Setup

Use this section if you are using the official pi camera that plugs directly into the board

USB Camera Setup

Raspberry Pi USB Camera Image Setup Wiki

Setting up the camera to take a picture automatically

The ADPAA scripts save-img.sh and transfer+remove.sh are run by crontab to acquire and transfer images.
Setup automation via cron jobs

Setting up a new TIMM

Setup a new TIMM

Meteorological Measurements Setup

Acquisition is provided on the Raspberry Pi using the python program of IMetX!2_try.py, SenMiniOFS_tri.py and YoungAnem_tri.py. These three programs have been added to ADPAA software package. The data goes into the CORDS/Granafa system, see [http://3.89.34.59:3000/d/rDMMs_T4k/tripod?orgId=1&from=1709890079217&to=1709933279217]