===== Melbourne, Florida Radar Setup ======

OBJECTIVE: Use Lrose-setup to display data from the Melbourne, Florida National Weather Service radar (KMLB).  The use of KMLB radara data is related to the CAPE2015 and CapeEx19 projects.

DATA SET:  August 1, 2015 at 71,154 - 72,839 sfm UTC.

=== Directory Setup ===
In your home directory ($HOME), remove exiting symbolic link and set new one.
  rm ~/projDir
  ln -s /nas/und/Florida/2015/Radar/projDir.kmlb projDir
  ln -s /nas/und/Florida/2015/Radar/projDir.kmlb projDir.kmlb

=== System Variable Setup ===
The params files use a lot of system variables that are set in the {{ :atmos:software:lrose:projdir.kmlb_project_info.tar |project_info.kmlb}} file.  To set system variables, source the project_info file.
  source projDir.kmlb/system/params/project_info.kmlb
  
=== Convert Data Files ===  
  RadxConvert -f projDir.kmlb/data/raw/radar/Melbourne/20150801/* -params ~/projDir.kmlb/ingest/params/RadxConvert.nexrad
  
The above command creates new data files in "$(DATA_DIR)/cfradial/$(radar_name)", for example ~/projDir.kmlb/data/cfradial/kmlb/20150801.  Should check this directory after running the command to make sure new (check file time stamp) files are created.
  
  Radx2Grid -params ~/projDir.kmlb/ingest/params/Radx2Grid.nexrad -f ~/projDir.kmlb/data/cfradial/kmlb/20150801/cfrad.20150801_211326.778_to_20150801_211755.622_KMLB_Surveillance_SUR.nc
  
For the above command, make sure params file has mode set to "FILELIST".  The commands creates file, ~/projDir.kmlb/data/mdv/radarCart/kmlb/20150801/ncf_20150801_211755.nc
  
=== View Data ===  
  Rview -time "2015 08 01 21 17 55" -params projDir.kmlb/display/params/Rview.archive
  
The above should display files created by Radx2Grid.  Below are other file examples.  
  
  Rview -time "2015 08 02 00 03 18" -params projDir.kmlb/display/params/Rview.archive
  Rview -time "2019 09 03 23 56 03" -params projDir.kmlb/display/params/Rview.archive