====== REVEAL ====== * Description: NASA aircraft tracking system. * Manafacturer: Sky Yarbrough - NASA * Serial Number: RVL10-14 * Point of Contact: Sky Yarbrough, TYBRIN CORPORATION (DFRC) and Warren G. Shearer * Notes: Ph. # is: 661-276-2874 * GCPex Web Site: [[http://gpm.nsstc.nasa.gov/gcpex/portal/]] Select RTMM_2nd Gen along the top bar * DRFC Web Site: [[https://indscore.dfrc.nasa.gov/WebSite/INDS_Portal/home/home_page/]] The led lights on front panel do not light up. * XChat IP: 10.30.1.10 *REVEAL Box updated by David Van Gilst (Dryden) 03/20/14 - added xChat and a new iridium sim card. *New iridium sim card #8988169312003911827 ===== Xchat ===== [[http://www.silverex.info/news/|X-Chat 2 for Windows]] [[http://xchat.org/|xchat.org]] [[http://asp-interface-2.arc.nasa.gov/API/parameter_data/N555DS/IWG1|Data Flow Retrieved for N555DS]] [[https://airbornescience.nasa.gov/tracker|NASA Airborne Science Program Aircraft Tracking]] [[http://mts.nasa.gov|NASA Mission Tool Suite]] [[http://catalog.eol.ucar.edu/pacdex/other/chat_howto.pdf|Configuration Instructions]] __New Set-up 4/11/2014__ *IP 10.30.1.11 1. In the xChat program click on the XChat then Network List. 2. Make sure on RDCC Network and select Edit 3. In the Servers for RDCC it should read "128.117.188.104/6668" click inside the text window so the setting activates 4. Close the windows in xChat that were opened for network editing 5. Now in the Command Prompt type "route -p ADD 128.117.188.104 mask 255.255.255.255 10.30.1.10" then hit enter. Note: Need to execute this command when the Reveal system is part of the network so that 10.30.1.10 is a valid address. 6. xChat should be able to communicate through the REVEAL box. To test that the route is valid use 'route print' and you should see the above route. Can also try 'ping 128.117.188.104' but need to be outside so that the Reveal system has a connections. =====Problems/Solutions===== ==== Problem (April 2014) ==== Did not get Ground Speed information out of system. ==== Cause ==== Software issues ==== Solution ==== Uploaded new software file, using telnet. ==== Problem ==== Did not fully function on the December 21, 2010 ==== Cause ==== Down link processing software was not converted to new computers. ==== Solution ==== Software was updated but should test more.