===Intial Raspberry Pi Setup Instructions===
  - Change the hostname to TIMMS-SN00XXX. Example for TIMMS with a serial number SN00200 in the command line use "sudo vi /etc/hostname TIMMS-SN00200" without parentheses "sudo vi etc/hostname TIMMS-SN00200".
  - Update the base raspberry pi software using the command "sudo apt-get update" to check available updates then "sudo apt upgrade" to perform the updates.  Example: sudo apt-get update
  - Install anydesk via the link https://anydesk.com/en/downloads/linux.
  - Set Password to standard password (if you don't know the standard password ask Dr. Delene).
  - Add the sourceforge ADPAA repository to the raspberry pi home directory.
  - Setup crontab to reboot each day.  See [[https://forums.raspberrypi.com/viewtopic.php?t=126106|https://forums.raspberrypi.com/viewtopic.php?t=126106]]

After these steps are done move onto setting up the camera depending on which type of camera is being used back on the main tripod page