Atmos Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
=====Tripod Instrumentation Meteorological Measurement System (TIMMS)=====

====TIMMS-SN00200===
===Summary===
  * Deployed Location: Clifford Hall 423
  * Deployed Position: 
  * Deployed Date: March 14, 2024
  
===Instruments Installed===
  * [[atmos:meteorological_observations_trailer:instrumentation:young-81000:home| R.M. Young 81000 3 Axis Sonic Anemometer]]
  * Anydesk (875 427 442)

=== Temp/Humidity Setup Via A/D Board ===
  * Uses a [[https://www.tequipment.net/Digilent/MCC-118/Voltage-Datalogger/?Source=googleshopping&gad_source=1&gclid=Cj0KCQjw6auyBhDzARIsALIo6v9-GpAuTCzdIdsHVmugmJZMCMTaGFFV8Fe6gwLAjusNZyt9NwHJeaIaAs9TEALw_wcB|Digilent MCC 118 - 12-Bit, 8-Channel Voltage Measurement DAQ HAT]] for Raspberry Pi

===USB Webcam===

====TIMMS-SN00100===
===Summary===
  * Deployed Location: Gorman Field Small UAS Airport, Emerado, ND
  * Deployed Position: Latitude 47 50' 55.13", Longitude 97 20' 54.14"
  * Deployed Elevation: 932ft (estimated with Google Earth)
  * Deployed Date: December 12, 2023.
  * [[.LabBook|Lab Book]]
  * Anydesk (562 750 981)
===Available Variables===
  * Visibility
  * Wind Speed
  * Station Pressure
  * Altimeter Setting
  * Temperature
  * Relative Humidity
===Source Code===
  * The data displayed on Grafana is coming from a python script that is titled IMetXQ2_tri.py. To change this code, connect to the Anydesk listed above.
===Instruments Installed===
  * [[atmos:meteorological_observations_trailer:instrumentation:imetxq2:home|iMet-XQ2 UAV Sensor]]
===Initial Raspberry Pi Setup===
  * * [[atmos:citation:instruments:raspberrypi_setup:home|Raspberry Pi Inital Setup Wiki]]
===Pi Camera Setup===
==Use this section if you are using the official pi camera that plugs directly into the board==
  * [[http://camera.atmos.und.edu/calgary/MetTrailer_CAM/PiCamera/plots/Picamera-latest.jpg|Direct Link to Camera Images]]
  * [[http://camera.atmos.und.edu/picam100.html|Raspberry Pi Camera Images Wiki]]
  * [[atmos:citation:instruments:raspberrypi_camera:home|Pi Camera Image Setup Wiki]]

===USB Camera Setup===
  *[[atmos:citation:instruments:USB_Camera:home|Raspberry Pi USB Camera Image Setup Wiki]]

===Setting up the camera to take a picture automatically===
  * The ADPAA scripts save-img.sh and transfer+remove.sh are run by crontab to acquire and transfer images.
  *[[atmos:citation:instruments:USB_Camera_automation:home|Setup automation via cron jobs]]

===Setting up a new TIMM===
  *[[atmos:tripod:setup|Setup a new TIMM]]

===Meteorological Measurements Setup===
Acquisition is provided on the Raspberry Pi using the python program of IMetX!2_try.py, SenMiniOFS_tri.py and YoungAnem_tri.py. These three programs have been added to ADPAA software package. The data goes into the CORDS/Granafa system, see [http://3.89.34.59:3000/d/rDMMs_T4k/tripod?orgId=1&from=1709890079217&to=1709933279217]