Differences

This shows you the differences between two versions of the page.

--- atmos:tripod:setup [2025/10/03 02:53] – ashley.vos
+++ atmos:tripod:setup [2025/11/25 01:55] (current) – ashley.vos
@@ Line 11: / Line 11: @@
-. Next you will need to setup the camera. The next steps will be dependent on the camera you will be using. Below are the two options either the Pi Camera that plugs directly into the board or the USB camera.
+. Next you will need to setup the camera. The next steps will be dependent on the camera you will be using. Below are the two options: either the Pi Camera that plugs directly into the board or the USB camera.
 ===3.1 Use this section if you are using the official pi camera that plugs directly into the board===
@@ Line 34: / Line 34: @@
   *[[atmos:citation:instruments:USB_Camera_automation:home|Setup automation via cron jobs]]
-===6. Setting up the 3d anemometer===
+===6. Setting up Instruments===
-  *[[atmos:citation:instruments:Setup_Young_Anemometer:home|Setting up the Young 3d Sonic Anemometer]]
+  *Setting up the 3d anemometer - [[atmos:citation:instruments:Setup_Young_Anemometer:home|Setting up the Young 3d Sonic Anemometer]]
+  *Setting up the Vaisala Temperature and Humidity Probe - [[atmos:citation:instruments:Setup_Vaisala Temperature and Humidity Probe:home|Setting up the Vaisala Temperature and Humidity Probe]]