Differences

This shows you the differences between two versions of the page.

--- atmos:tripod:setup [2024/11/08 23:21] – delene
+++ atmos:tripod:setup [2024/11/08 23:35] (current) – delene
@@ Line 1: / Line 1: @@
-====Setting up a new TIMM====
+====Setting up a new Raspberry Pi system such as a TIMM system====
+The TIMM system is a system used to operate the Tripod Instrumentation Meteorological Measurement instrument.
 In order to setup an new TIMM you will need a raspberry pi, A camera (can be usb or pi cam the instructions differ based on the camera), anemometer, and temperature/humidity sensor. This guide will walk you through the setup process.
@@ Line 21: / Line 22: @@
   *[[atmos:citation:instruments:USB_Camera:home|Raspberry Pi USB Camera Image Setup Wiki]]
 ===4. Live IP Video Stream setup===
-  *[[atmos:citation:instruments:USB_Camera_LiveStrea.:home|Raspberry Pi USB LiveStream
+  *[[atmos:citation:instruments:USB_Camera_LiveStrea.:home|Raspberry Pi USB LiveStream]]
   *Open Anydesk and open a new command line.
   *Verify USB WebCam is connected and listed using "lsusb" command.