Differences

This shows you the differences between two versions of the page.

--- atmos:tripod:setup [2024/11/08 23:17] – delene
+++ atmos:tripod:setup [2024/11/08 23:35] (current) – delene
@@ Line 1: / Line 1: @@
-====Setting up a new TIMM====
+====Setting up a new Raspberry Pi system such as a TIMM system====
+The TIMM system is a system used to operate the Tripod Instrumentation Meteorological Measurement instrument.
 In order to setup an new TIMM you will need a raspberry pi, A camera (can be usb or pi cam the instructions differ based on the camera), anemometer, and temperature/humidity sensor. This guide will walk you through the setup process.
@@ Line 15: / Line 16: @@
   * [[http://camera.atmos.und.edu/calgary/MetTrailer_CAM/PiCamera/plots/Picamera-latest.jpg|Direct Link to Camera Images]]
   * [[http://camera.atmos.und.edu/picam100.html|Raspberry Pi Camera Images Wiki]]
-  * [[http://wiki.atmos.und.edu/doku.php?id=atmos:citation:instruments:raspberrypi_camera:home|Pi Camera Image Setup Wiki]]
+  * [[atmos:citation:instruments:raspberrypi_camera:home|Pi Camera Image Setup Wiki]]
 ===3.2 USB Camera Setup===
-  *[[http://wiki.atmos.und.edu/doku.php?id=atmos:citation:instruments:USB_Camera:home|Raspberry Pi USB Camera Image Setup Wiki]]
+  *[[atmos:citation:instruments:USB_Camera:home|Raspberry Pi USB Camera Image Setup Wiki]]
 ===4. Live IP Video Stream setup===
-  *[[http://wiki.atmos.und.edu/doku.php?id=atmos:citation:instruments:USB_Camera_LiveStrea.:home|Raspberry Pi USB LiveStream
+  *[[atmos:citation:instruments:USB_Camera_LiveStrea.:home|Raspberry Pi USB LiveStream]]
   *Open Anydesk and open a new command line.
   *Verify USB WebCam is connected and listed using "lsusb" command.
@@ Line 30: / Line 32: @@
 ===5. Setting up the camera to take a picture automatically and transfer the images temporarily to aws then to calgary===
   * The ADPAA scripts save-img.sh and transfer+remove.sh are run by crontab to acquire and transfer images.
-  *[[http://wiki.atmos.und.edu/doku.php?id=atmos:citation:instruments:USB_Camera_automation:home|Setup automation via cron jobs]]
+  *[[atmos:citation:instruments:USB_Camera_automation:home|Setup automation via cron jobs]]
 ===6. Setting up the 3d anemometer===
-  *[[http://wiki.atmos.und.edu/doku.php?id=atmos:citation:instruments:Setup_Young_Anemometer:home|Setting up the Young 3d Sonic Anemometer]]
+  *[[atmos:citation:instruments:Setup_Young_Anemometer:home|Setting up the Young 3d Sonic Anemometer]]