Differences

This shows you the differences between two versions of the page.

--- atmos:researchmeetingnotes:researchmeetingnotes:home:ashley_vos [2026/04/16 21:16] – ashley.vos
+++ atmos:researchmeetingnotes:researchmeetingnotes:home:ashley_vos [2026/04/18 00:20] (current) – ashley.vos
@@ Line 7: / Line 7: @@
 DNW: Did Not Work
+==== April 17th, 4:16 pm. ====
+== Tasks ==
+  - TIMMS-00400 - Add MiniPWS Sensor
+  - Cosmic/gamma ray detector - use cloud chamber photomultiplier tube
+  - Snow Depth Detector - Find manual and get set up.
+  - Visibility Sensor - Test to see if working
+  - AWS cameras - take apart and order new port/replace port
+  - Program Optical Rain Gauge - Document, finish writing programs
+  - Create append method for ADPAA
+  - Pitot Tube Code - Either get on raspberry pi or write serial to raspberry pi
+  - Set up Raspberry Pi Camera and AWS camera
+  - Mount second pitot tube in second blue chamber
+  - Order tubing connectors for pitot tube
+== Reports ==
+  * Continued working on pitot tube code
 ==== April 16th, 4:11 pm. ====
@@ Line 15: / Line 33: @@
   - Snow Depth Detector - Find manual and get set up.
   - Visibility Sensor - Test to see if working
-  - iMet-XQ2 - Check in with Dr. Delene
   - AWS cameras - take apart and order new port/replace port
   - Program Optical Rain Gauge - Document, finish writing programs
@@ Line 21: / Line 38: @@
   - Pitot Tube Code - Either get on raspberry pi or write serial to raspberry pi
   - Set up Raspberry Pi Camera and AWS camera
-  - Test Anemometer
   - Mount second pitot tube in second blue chamber
 == Reports ==
-  *
+  * Attempted to test anemometer, but meter unusable. Reported to Dr. Delene.
+  * IMet-XQ2 - Checked in with Dr. Delene, project to be abandoned as there is no more repair possible.
+  * Connected Arduino and Raspberry Pi to communicate pitot tube data. Need to write to a text file yet
 ==== April 14th, 3:42 pm. ====