Differences

This shows you the differences between two versions of the page.

--- atmos:researchmeetingnotes:researchmeetingnotes:home:ashley_vos [2025/09/30 16:32] – ashley.vos
+++ atmos:researchmeetingnotes:researchmeetingnotes:home:ashley_vos [2025/10/10 02:16] (current) – ashley.vos
@@ Line 2: / Line 2: @@
   Interest in the surface measurement instrument. Interested in probe flow modeling and ground electric field mills.
-==== Meeting September 26, 9 am. ====
+==== October 9, 7:00 pm. ====
+  * Remote Work
+=== Tasks ===
+  - Create TIMMS-00400
+  - Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot
+=== Reports ===
+  * Will remotely access TIMMS-00300 to properly identify devices
+    * Will build into TIMMS-00400
+  * Looked into Raspberry Pi configuration and set up
+  * Read instrument manuals for ultrasonic anemometer and temperature and humidity sensor.
-=== Discussion ===
+==== October 8, 8:00 am. ====
-  * Asked John Wold to give Ashley a Wiki account.
+  * Received box for TIMMS-00400
-  * Suggest working on a **temperate/sonic wind/ camera for the [[http://mettrailer.atmos.und.edu/|MetTrailer tower]]**.
+=== Tasks ===
-  * Suggest making a TIMMS-00400 for the lower tower on the MetTrailer.
+  - Create TIMMS-00400
-  * Meeting next week, 9 am check-in
+  - Connect to Littlestorm
+  - Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot
+=== Reports ===
+  * Will remotely access TIMMS-00300 to properly identify devices
+    * Will build into TIMMS-00400
+  * Connected to Littlestorm
+  * Analyzed new components for TIMMS-00400
+==== October 6, 5:15 pm. ====
+  * Met with Dr. Delane
+    * Accessed ndus vpn instead of und vpn to connect to Littlestorm
+    * Received numerous components to continue building TIMMS-00400
 === Tasks ===
-  *Create TIMMS-00400
+  - Create TIMMS-00400
-    *Parts List
+  - Connect to Littlestorm
-  *Connext to Littlestorm
+  - Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot
+=== Reports ===
+  * Will remotely access TIMMS-00300 to properly identify devices
+    * Will build into TIMMS-00400
+  * Waiting on email to finish connecting to Littlestorm
+  * Began setting up Raspberry Pi for TIMMS-00400
+    * Set up mouse and keyboard
+    * Looked at power supply and video output ports
+    * need USBC for power supply
+      * Found cord that worked
+      * Does not have large wall adapter, as recommended by Dr. Delane.
+      * Look into finding a cord with USBC connection and large adapter
+    * Need micro-hdmi for video
+      * On order
+==== October 2, 7:30 pm. ====
+  * Remote Work
+=== Tasks ===
+  - Create TIMMS-00400
+    - Parts List
+  - Connect to Littlestorm
+  - Connect to Grafana
+  - Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot
 === Reports ===
-  *Unable to connect to Littlestorm (connection timeout error)
+  *TO BE ADDRESSED AT NEXT MEETING (compilation)
-  *Parts List Progress
+    * Unable to connect to Littlestorm
-    *Raspberry Pi 4B
+    * Parts Uncertainty
-    *Temp/Humidity Sensor
+      * Camera (which type)
+      * Correct model of ultrasonic anemometer
+      * Box (Camera or square)
+      * UNUSED components (verify)
+        * Pressure Transducer
+        * DAQ HAT
+        * Visibility Sensor
+        * iMet-XQ2 UAV Sensor
+        * Web Cam
+  *DETAIL
+    * Unable to connect to Littlestorm (connection timeout error)
+      * Address at next meeting with Dr. Delane
+    * Connected to Grafana
+    * Parts List Progress
+      * Collected wiki articles on instruments, TIMMS, and the MetTrailer
+      * Began compiling more parts
+        * Raspberry Pi 4B
+        * Temp/Humidity Sensor
+        * Tripod
+        * Camera (USB or Pi cam)
+        * Ultrasonic anemometer (Young Ultrasonic Anemometer Model 81000)
+        * Camera Box or electrical box
+        * NOT being used
+          * Pressure Transducer
+          * DAQ HAT
+          * Visibility Sensor
+          * iMet-XQ2 UAV Sensor
+          * Web Cam
+    * Set USB devices
+      * Searched through wiki and online for guides
+      * Found and recorded methods of assigning port identifiers for specific devices
+        * Consult with Dr. Delane on updating TIMMS-00300, as it is deployed at the Glacial Ridge Field Site
+      * Save records for application on TIMMS-00400
 ==== Meeting September 30, 9 am. ====
   * Have Wiki account and can edit things.
   * Order videos, comment monitor up the Raspberry Pi.
 === Tasks ===
-  *Create TIMMS-00400
+  - Create TIMMS-00400
-    *Parts List
+    - Parts List
-  *Connect to Littlestorm
+  - Connect to Littlestorm
+  - Set USB Devices on TIMMS-00300 and TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot
 === Reports ===
   *Unable to connect to Littlestorm (connection timeout error)
@@ Line 41: / Line 112: @@
   *Unable to access Grafana
   *Downloaded ADPAA
+  *Collected atmos wiki sites for task 3, no other progress
+==== Meeting September 26, 9 am. ====
+=== Discussion ===
+  * Asked John Wold to give Ashley a Wiki account.
+  * Suggest working on a **temperate/sonic wind/ camera for the [[http://mettrailer.atmos.und.edu/|MetTrailer tower]]**.
+  * Suggest making a TIMMS-00400 for the lower tower on the MetTrailer.
+  * Meeting next week, 9 am check-in
+=== Tasks ===
+  *Create TIMMS-00400
+    *Parts List
+  *Connect to Littlestorm
+=== Reports ===
+  *Unable to connect to Littlestorm (connection timeout error)
+  *Parts List Progress
+    *Raspberry Pi 4B
+    *Temp/Humidity Sensor