atmos:researchmeetingnotes:researchmeetingnotes:home:ashley_vos
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| atmos:researchmeetingnotes:researchmeetingnotes:home:ashley_vos [2026/01/07 22:27] – ashley.vos | atmos:researchmeetingnotes:researchmeetingnotes:home:ashley_vos [2026/01/20 23:04] (current) – ashley.vos | ||
|---|---|---|---|
| Line 2: | Line 2: | ||
| Interest in the surface measurement instrument. Interested in probe flow modeling and ground electric field mills. | Interest in the surface measurement instrument. Interested in probe flow modeling and ground electric field mills. | ||
| DNW = Did Not Work | DNW = Did Not Work | ||
| + | |||
| + | ==== January 20th, 5:01 pm. ==== | ||
| + | | ||
| + | == Tasks == | ||
| + | - TIMMS-00400 - Document | ||
| + | - Raspberry Pi | ||
| + | - Set USB Devices on TIMMS-00400 Raspberry Pi to properly identify devices in port 1 and 2 on reboot | ||
| + | - Fluxgate compass | ||
| + | - read manual, determine connection, edit code | ||
| + | - 3D Anemometer-fix readings | ||
| + | - need typical db-9 rs-232 connection | ||
| + | - will need to change serial and voltage output format. | ||
| + | - 1=u, 3=w | ||
| + | - Need cover for relative temperature and humidity sensor. | ||
| + | - Pressure Transducer | ||
| + | - Must connect to A/D board, ideally through wires | ||
| + | - Output Analog, atmospheric pressure, highest accuracy, cheap | ||
| + | - iMet-XQ2 - Check with Dr. Delene | ||
| + | - Rain Gauges (Tipping Buckets) - GPIO pins 5 (white wire) and 9 (black wire), FogTippingBucket.py | ||
| + | - Connect to Raspberry Pi and test | ||
| + | - Program Small Tipping Bucket Rain Gauge and Optical Rain Gauge - Document | ||
| + | - Hook up to raspberry pi | ||
| + | - finish writing programs | ||
| + | - get ready before rain, wait for stuff from tyler | ||
| + | - Aerosol Particle Sizer - test via other raspberry pi to see if the device works, document | ||
| + | - Create append method for ADPAA | ||
| + | - Reconnect to computers in Clifford. (When at campus) | ||
| + | == Reports == | ||
| + | * TIMMS - DNW | ||
| + | * iMet-XQ2 - Organized and cleaned up sodder station. Soddered both iMet-XQ2 with new ports and replaced the batteries, then attempted to connect to iMet software, with no success. It may be time to give up :( | ||
| + | * Rain Gauges - Organized and cleaned up space | ||
| + | * Tipping Bucket Programming - DNW | ||
| + | * Aerosol Particle Sizer - DNW | ||
| + | * Append - DNW | ||
| ==== January 7th, 1:34 pm. ==== | ==== January 7th, 1:34 pm. ==== | ||
atmos/researchmeetingnotes/researchmeetingnotes/home/ashley_vos.txt · Last modified: 2026/01/20 23:04 by ashley.vos