Differences

This shows you the differences between two versions of the page.

--- atmos:pestiside:lead_sampling [2026/02/27 03:25] – lance.linenberg
+++ atmos:pestiside:lead_sampling [2026/06/08 20:52] (current) – halmos
@@ Line 7: / Line 7: @@
  * {{https://1drv.ms/x/c/52158434cd7bae56/IQBxiZztZ2lwT7wIT7zp2L9WAd2UJ6rrenfbCQzaPkPZyTg?e=VAKzAJ |Lead Filter Data}}
 ==== UND Fleet Leaded Fuel Analysis ====
+===Software Documentation===
+Code written in Python is being developed to analyze data files obtained by the Aviation department. To view the code, make sure you have the latest revision of ADPAA. The files can be found in ADPAA/src/airport/. In this folder, you will find subfolders depending on the data analysis you would like to perform.
+==Extracting Aircraft Data Files==
+When given compressed aircraft data in a .7z format, und_ac_sort.py extracts the files and sorts it in accordance with ADPAA's directory format. **NOTE: The program uses relative paths, so when running the code you must run it in the directory where you would like to extract the data. Ex: /nas/und/GFK/**
+==Location of Aircraft Data on Littlestorm==
+Aircraft data should be extracted to nas/und/GFK/. The standard ADPAA format is as follows: nas/und/GFK/Year/GFK/Aircraft/Model/FlightData/YYYYMMDD
+==Obtaining Boundary Layer Data==
+Analysis of boundary layer data can be performed by running the boundary_master.py file. Ensure that you have an API key with the ECMWF. For more information on the setup of the API key visit: https://cds.climate.copernicus.eu/how-to-api.
+The boundary master file calls 3 different files: boundary_layer_api.py, boundary_grib.py, and boundary_boxplot.py.
+==Visualizing Aircraft Data==
+Code used to visualize aircraft data is located in ADPAA/src/airport/und_kml. In this folder, there are 2 files: aircraft_kml_bl.py and aircraft_kml.py.
+aircraft_kml.py loops through csv files in the current working directory and creates an individual kml file for each aircraft, which can be loaded into software such as Google Earth to visualize where flights go in a 3D space. The kml files include time-series data, so it is possible to create a short GIF of how aircraft move throughout the area over time. Currently, this time series data is limited in functionality using Google Earth. When viewing hundreds of files over a 24 hour period, the program only displays aircraft movement over 20 minute intervals. In the future, code will be developed to use Cartopy and create GIF animations which will be cleaner and allow a higher resolution of data than Google Earth.
+aircraft_kml_bl.py is a program that is in development. It will only display aircraft tracks that are in the boundary layer for each given day.
+==Analyzing Aircraft Data==
+Code to analyze aircraft data is currently in development. In-progress code can be found in ADPAA/src/aircraft/aircraft_pbl. Below are the goals of the analyzing process:
+  * csv_append.py will create new csv files in the format data.pbl.csv.
+    * Included in this will be 3 new parameters:
+      * PBL Height
+      * PBL Flag (0 if out of the PBL, 1 if in the PBL)
+      * Radial distance from GFK sampling site (kilometers)
+  *unnamed_file.py will create a daily summary file that summarizes all flights for each day. Included will be:
+    * Flight start time
+    * Flight start date
+    * Total flight time
+    * End time
+    * End date
+    * Total gallons burned
+    * Gallons burned in boundary layer
+      * at different intervals (5km, 10km, 20km)
+**For questions about Python code, please email jacob.halmos@und.edu**
+//Code documentation last updated 06/08/2026//
 === Engineering Performance, FAA requirements, Certification requirements ===
@@ Line 16: / Line 61: @@
 CFR :: 14 CFR Part 38 -- Airplane Fuel Efficiency Certification (FAR Part 38)
+- https://www.ecfr.gov/current/title-14/chapter-I/subchapter-C/part-38
 AC 20-24C Approval of Propulsion Fuels and Lubricating Oils
+- https://www.faa.gov/documentLibrary/media/Advisory_Circular/AC%2020-24C.pdf
@@ Line 27: / Line 73: @@
 Tetraethyl lead (Pb(C₂H₅)₄) is added to aviation gasoline used in piston-engine aircraft to prevent engine knocking and to raise octane levels. While fuel with less lead can be made, it becomes harder to meet the high-octane requirements needed for high-performance aircraft. Switching to unleaded aviation fuel is challenging for several reasons, including cost, FAA safety regulations, and engine compatibility. Creating a fuel that meets safety standards, provides enough octane for proper engine performance, and is affordable is a complicated process.
+==== Papers ====
+  * [[https://www.combustion-engines.eu/The-future-of-leaded-aviation-fuel-navigating-the-challenges-of-transition,210465,0,2.html|The future of leaded aviation fuel: navigating the challenges of transition]]