Differences

This shows you the differences between two versions of the page.

--- atmos:northpolradar:remote_vnc_to_radar1_2 [2026/07/28 18:08] – [Manual SSH] benjamin.guida
+++ atmos:northpolradar:remote_vnc_to_radar1_2 [2026/07/28 18:14] (current) – [Editing local config to ProxyJump ssh] benjamin.guida
@@ Line 1: / Line 1: @@
-======== Remote ssh into radar1/2========
+======== Remote ssh into radar2========
 =====Radar2================================================================
 Radar1 and Radar2 are connected to the University network through radarpi where it takes the local radar analysis network and masquerades them through the pi, and by an ssh into radarpi, you can ssh into either radar computers. Due to the University network settings you must also ssh to radarpi through littlestorm and be connected to the UND VPN.\\
 \\
-You ---> Littlestorm ---> radarpi network ---> Radar1/2\\
+You ---> Littlestorm ---> radarpi network ---> Radar2\\
 \\
 Through this you could also connect to the RVP8 or the RCP8 as needed.\\
@@ Line 23: / Line 23: @@
 then edit/create a text file named config to create Hosts
   nano config
-in config you can set up Hosts that allow you to shorten your ssh command. The following code is an example of setting up your device to ssh into littlstorm without manually typing ssh firstname.lastname@littlsestorm.atmos.und.edu\\
+in .ssh/config you can set up Hosts that allow you to shorten your ssh command. The following code is an example of setting up your device to ssh into littlstorm without manually typing ssh firstname.lastname@littlsestorm.atmos.und.edu\\
   Host littlestorm
     HostName littlestorm.atmos.und.edu