Differences

This shows you the differences between two versions of the page.

--- atmos:northpolradar:remote_vnc_to_radar1_2 [2026/07/28 17:54] – [Manual SSH] benjamin.guida
+++ atmos:northpolradar:remote_vnc_to_radar1_2 [2026/07/28 18:14] (current) – [Editing local config to ProxyJump ssh] benjamin.guida
@@ Line 1: / Line 1: @@
-======== Remote ssh into radar1/2========
+======== Remote ssh into radar2========
 =====Radar2================================================================
 Radar1 and Radar2 are connected to the University network through radarpi where it takes the local radar analysis network and masquerades them through the pi, and by an ssh into radarpi, you can ssh into either radar computers. Due to the University network settings you must also ssh to radarpi through littlestorm and be connected to the UND VPN.\\
 \\
-You ---> Littlestorm ---> radarpi network ---> Radar1/2\\
+You ---> Littlestorm ---> radarpi network ---> Radar2\\
 \\
 Through this you could also connect to the RVP8 or the RCP8 as needed.\\
@@ Line 14: / Line 14: @@
   ssh radar2
 The config file is setup for operator@radar2 to be radar2\\
-The password for radarpi is available from the radarpi page\\
+The password for radarpi is available from [[https://atmoswiki.azurewebsites.net/doku.php?id=atmos:northpolradar:radarpi|radarpi]]\\
 Use the radar2 operator password given to you.
 =====Editing local config to ProxyJump ssh======
-To ssh from your machine to radar2 in one command you can set up a ProxyJump by editing your config file in .ssh\\
+To ssh from your machine to radar2 in one command you can set up Hosts by editing your config file in .ssh\\
-if you don't have a .ssh file, create one.
+if you don't have a .ssh directory, create one.
   mkdir -p .ssh
 then edit/create a text file named config to create Hosts
   nano config
-in config you can set up Hosts that allow you to shorten your ssh command. for example
+in .ssh/config you can set up Hosts that allow you to shorten your ssh command. The following code is an example of setting up your device to ssh into littlstorm without manually typing ssh firstname.lastname@littlsestorm.atmos.und.edu\\
   Host littlestorm
     HostName littlestorm.atmos.und.edu
     User firstname.lastname
-adding ProxyJumps allows your ssh command to jump through a machine, and allows us to jump from our local machine directly to radar2//
+adding ProxyJumps allows your ssh command to jump through a machine, and allows us to jump from our local machine directly to radar2\\
-Paste the following into your .ss/config file to be able to ssh into radar2 by typing ssh radar2
+Paste the following into your .ss/config file to be able to ssh into radar2 by typing ssh radar2\\
   Host radar2
     HostName 192.168.50.2
@@ Line 45: / Line 45: @@
     User firstname.lastname
+=====VNC Server=====
+Both radar1 and radar2 have a vnc service installed which can be accesed through ProxyJump ssh and port forewording. if your .ssh/config file is setup then the following command allows you to open the server with a vnc viewer where the VNC name is localhost:5901\\
+  ssh -J littlestorm,radarpi -L 5901:localhost:5901 radar2
+I use TigerVNC which is an open source VNC viewer available [[https://sourceforge.net/projects/tigervnc/files/stable/1.16.2/vncviewer64-1.16.2.exe/download|here]]