Differences

This shows you the differences between two versions of the page.

--- atmos:g-cdp:home [2025/07/24 14:41] – rickbeil
+++ atmos:g-cdp:home [2026/09/14 20:58] (current) – delene
@@ Line 16: / Line 16: @@
   * [[LabBook|Lab Book]]
-===Start Command===
+===Start Command (Start Data Collection using the FOG-SN00100) ===
-  * Below is the order in which you should run commands to start data collection using the FOG-SN00100
+  - Open a new Terminal Window
-  * 1. turn on environment: . CoPAS/ADPAA/env/bin/activate
+  - Activate the python environment: . CoPAS/ADPAA/env/bin/activate
-  * 2. open up directory to start program: cd CoPAS/ADPAA/src/acquire_python
+  - Navigate to Data Directory: cd G-CDP/Fog_Data
-  * 3. power up the instrument: python3 CDPPowerControl.py on
+  - start pitot tube code: python3 ../../CoPAS/ADPAA/src/acquire_python/pitot_tube.py
-  * 4. start data collection: python3 CDP.py
+  - Open a New Terminal Window, use for everything below.
+  - Activate the python environment: . CoPAS/ADPAA/env/bin/activate
+  - Navigate to Data Directory: cd G-CDP/Fog_Data
+  - Power up the CDP instrument and Fans: python3 ../../CoPAS/ADPAA/src/acquire_python/CDPPowerControl.py on
+  - Start CDP Data Collection: python3 ../../CoPAS/ADPAA/src/acquire_python/CDP.py
 ===Stop Command===
   * Below is the order in which you should run commands to end data collection using the FOG-SN00100
-  * 1. type control c into keyboard to end the CDP data collection program
+  * 1. Type control c into keyboard to end the CDP and Pitot Tube data collection programs.
-  * 2. power off the instrument: python3 CDPPowerControl.py off
+  * 2. Power off the instrument: python3 ~/CoPAS/ADPAA/src/acquire_python/CDPPowerControl.py off
-  * 3. move data file to appropriate directory: mv {filename} ~/G-CDP/Data/
 ===Crontab command used to rsync the data from FOG-SN00100 to Little Storm server===