Atmos Wiki

User Tools

Site Tools

Trace: • home • home • dc_wiring • erindoyle
atmos:g-cdp:home

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
atmos:g-cdp:home [2025/04/12 22:09] – rickbeilatmos:g-cdp:home [2026/09/14 20:58] (current) – delene
Line 5: Line 5:
 ===Summary=== ===Summary===
   * Ground based instrument used to collect fog data    * Ground based instrument used to collect fog data 
-  * Deployed Date: March 5, 2025+  * Deployed Date: March 5, 2025 - May 1, 2025
   * Deployed Location: Clifford Hall 601 Roof   * Deployed Location: Clifford Hall 601 Roof
 +  * **NOT ACTIVE**
  
 ===Instruments installed=== ===Instruments installed===
Line 15: Line 16:
   * [[LabBook|Lab Book]]   * [[LabBook|Lab Book]]
  
-===Start Command=== +===Start Command (Start Data Collection using the FOG-SN00100) === 
-  * Below is the order in which you should run commands to start data collection using the FOG-SN00100 +  - Open a new Terminal Window 
-  * 1. turn on environment: . CoPAS/ADPAA/env/bin/activate +  - Activate the python environment: . CoPAS/ADPAA/env/bin/activate 
-  * 2. open up directory to start program: cd CoPAS/ADPAA/src/acquire_python +  - Navigate to Data Directory: cd G-CDP/Fog_Data 
-  * 3. power up the instrument: python3 CDPPowerControl.py on +  - start pitot tube code: python3 ../../CoPAS/ADPAA/src/acquire_python/pitot_tube.py 
-  * 4. start data collection: python3 CDP.py +  - Open a New Terminal Window, use for everything below. 
 +  - Activate the python environment: . CoPAS/ADPAA/env/bin/activate 
 +  - Navigate to Data Directory: cd G-CDP/Fog_Data 
 +  - Power up the CDP instrument and Fans: python3 ../../CoPAS/ADPAA/src/acquire_python/CDPPowerControl.py on 
 +  - Start CDP Data Collection: python3 ../../CoPAS/ADPAA/src/acquire_python/CDP.py 
  
 ===Stop Command=== ===Stop Command===
   * Below is the order in which you should run commands to end data collection using the FOG-SN00100   * Below is the order in which you should run commands to end data collection using the FOG-SN00100
-  * 1. type control c into keyboard to end the CDP data collection program  +  * 1. Type control c into keyboard to end the CDP and Pitot Tube data collection programs.  
-  * 2. power off the instrument: python3 CDPPowerControl.py off  +  * 2. Power off the instrument: python3 ~/CoPAS/ADPAA/src/acquire_python/CDPPowerControl.py off  
-  * 3. move data file to appropriate directory: mv {filename} ~/G-CDP/Data/+
  
 ===Crontab command used to rsync the data from FOG-SN00100 to Little Storm server=== ===Crontab command used to rsync the data from FOG-SN00100 to Little Storm server===
atmos/g-cdp/home.1744495740.txt.gz · Last modified: 2025/04/12 22:09 by rickbeil