Differences

This shows you the differences between two versions of the page.

--- atmos:g-cdp:home [2025/03/09 22:52] – created rickbeil
+++ atmos:g-cdp:home [2026/09/14 20:58] (current) – delene
@@ Line 1: / Line 1: @@
-**Ground Cloud Droplet Probe (G-CDP)**
+=====Fog Observation on Ground (FOG)=====
+====FOG-SN00100====
+===Summary===
+  * Ground based instrument used to collect fog data
+  * Deployed Date: March 5, 2025 - May 1, 2025
+  * Deployed Location: Clifford Hall 601 Roof
+  * **NOT ACTIVE**
+===Instruments installed===
+  * Cloud droplet probe (CDP) by Droplet Measurement Technologies
+  * pressure sensor for measurement of intake air flow (Future installment)
+===Lab Book===
+  * [[LabBook|Lab Book]]
+===Start Command (Start Data Collection using the FOG-SN00100) ===
+  - Open a new Terminal Window
+  - Activate the python environment: . CoPAS/ADPAA/env/bin/activate
+  - Navigate to Data Directory: cd G-CDP/Fog_Data
+  - start pitot tube code: python3 ../../CoPAS/ADPAA/src/acquire_python/pitot_tube.py
+  - Open a New Terminal Window, use for everything below.
+  - Activate the python environment: . CoPAS/ADPAA/env/bin/activate
+  - Navigate to Data Directory: cd G-CDP/Fog_Data
+  - Power up the CDP instrument and Fans: python3 ../../CoPAS/ADPAA/src/acquire_python/CDPPowerControl.py on
+  - Start CDP Data Collection: python3 ../../CoPAS/ADPAA/src/acquire_python/CDP.py
+===Stop Command===
+  * Below is the order in which you should run commands to end data collection using the FOG-SN00100
+  * 1. Type control c into keyboard to end the CDP and Pitot Tube data collection programs.
+  * 2. Power off the instrument: python3 ~/CoPAS/ADPAA/src/acquire_python/CDPPowerControl.py off
+===Crontab command used to rsync the data from FOG-SN00100 to Little Storm server===
+  * 0100***/home/david.delene/bin/rsync_FOG-SN00100tolittlestorm 1>
+  * /home/david.delene/bin/crontab_FOG_SN00100tolittlestorm.log 2>
+  * /home/david.delene/bin/crontab_FOG_SN00100tolittlestorm.log