Atmos Wiki

User Tools

Site Tools

Trace:
atmos:citation:research:editingpitotwing

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
atmos:citation:research:editingpitotwing [2026/08/06 17:31] – paramvir.singhatmos:citation:research:editingpitotwing [2026/08/06 17:35] (current) – paramvir.singh
Line 5: Line 5:
   - The CIP pitot pressure is about 10 mb lower than the nose pitot pressure.   - The CIP pitot pressure is about 10 mb lower than the nose pitot pressure.
  
-==== How to remove the corrupted data ====+=== How to remove the corrupted data === 
   - Connect to vpn.ndus.edu through Global Protect   - Connect to vpn.ndus.edu through Global Protect
   - Open and log into the Littlestorm server through PuTTY.   - Open and log into the Littlestorm server through PuTTY.
-  - After logging in, type in the command: cd /nas/und/Florida/2019/Aircraft/CitationII_N555DS/FlightData+  - After logging in, type in the command: **cd /nas/und/Florida/2019/Aircraft/CitationII_N555DS/FlightData**
   - After going to the FlightData directory, look inside it for a subdirectory named after the specific date of flight you want to see. For instance, I chose the 20190803_142455 flight data to make changes.   - After going to the FlightData directory, look inside it for a subdirectory named after the specific date of flight you want to see. For instance, I chose the 20190803_142455 flight data to make changes.
-  - After selecting the directory of interest, type: cd PostProcessing +  - After selecting the directory of interest, type: **cd PostProcessing** 
-  - Navigate to the .physical.raw.gz file. +  - Navigate to the **.physical.raw.gz** file. 
-Editing the file and data inside it: +=== Editing the file and data inside it: === 
 + 
    - First, if the file is compressed, meaning it is in .gz format, then decompress it using the command: **gunzip 19_08_03_14_24_55.physical.raw**    - First, if the file is compressed, meaning it is in .gz format, then decompress it using the command: **gunzip 19_08_03_14_24_55.physical.raw**
    - Once the file is in decompressed form, type: **aplot 19_08_03_14_24_55.physical.raw**    - Once the file is in decompressed form, type: **aplot 19_08_03_14_24_55.physical.raw**
Line 24: Line 26:
    - Type in the editor name    - Type in the editor name
    - Select the parameter as Pitot_Wing    - Select the parameter as Pitot_Wing
-   - Then type in the reason for making the edit. For instance, I type "Not connected, negative values"+   - Then, please specify the reason for making the edit. For example, I might indicate "Not connected, negative values."
    - Click **"Store Edit info"**. This will create a .physical.edits file in the directory you are in.     - Click **"Store Edit info"**. This will create a .physical.edits file in the directory you are in. 
-   - Then go to the File tab and click on **"Apply edits"**. This will create a .physical.cleans file in the directory.  +   - Proceed to the File tab and select **"Apply edits"**. This action will generate a .physical.cleans file within the directory.  
-   - The .physical.cleans file will not contain the data from the Pitot_wing sensor.+   - The physical. cleans file will exclude data from the Pitot_wing sensor.
                      
      
atmos/citation/research/editingpitotwing.1786037505.txt.gz · Last modified: 2026/08/06 17:31 by paramvir.singh