Atmos Wiki

User Tools

Site Tools

Trace: • home • ashley_vos • und00300 • home • home • und00100 • home • guide_to_grafana
atmos:citation:instruments:setup_vaisala_temperature_and_humidity_probe:home

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
atmos:citation:instruments:setup_vaisala_temperature_and_humidity_probe:home [2025/11/25 02:40] – ashley.vosatmos:citation:instruments:setup_vaisala_temperature_and_humidity_probe:home [2025/11/25 02:47] (current) – ashley.vos
Line 5: Line 5:
 The Vaisala temperature and humidity probe has a few key components when it comes to setting up the instrument. The Vaisala temperature and humidity probe has a few key components when it comes to setting up the instrument.
   *Sensors and Sensor Cap/Shield - The shield/cap protects the sensors from damage, while the sensors collect data on temperature and humidity.   *Sensors and Sensor Cap/Shield - The shield/cap protects the sensors from damage, while the sensors collect data on temperature and humidity.
-{{:atmos:citation:instruments:setup_vaisala_temperature_and_humidity_probe:screenshot_2025-11-24_203827.png?200|}}+{{:atmos:citation:instruments:setup_vaisala_temperature_and_humidity_probe:screenshot_2025-11-24_203827.png?100|}}{{:atmos:citation:instruments:setup_vaisala_temperature_and_humidity_probe:screenshot_2025-11-24_203856.png?100|}}
   *Shield - Protects the entire upper area of the apparatus from harsher conditions.   *Shield - Protects the entire upper area of the apparatus from harsher conditions.
 +{{:atmos:meteorological_observations_trailer:temprh1.jpg?nolink&100|}} 
   *Wires - At the end of the cord, there will be seven (7) exposed wires of the following colors: clear (no plastic covering), green, yellow, blue, white, red, and black.   *Wires - At the end of the cord, there will be seven (7) exposed wires of the following colors: clear (no plastic covering), green, yellow, blue, white, red, and black.
 +{{:atmos:citation:instruments:setup_vaisala_temperature_and_humidity_probe:screenshot_2025-11-24_203836.png?100|}}
     * Clear - Shield wire: it protects the other wires from interference from the surroundings.     * Clear - Shield wire: it protects the other wires from interference from the surroundings.
     * Green - [Needs to be updated]     * Green - [Needs to be updated]
Line 20: Line 22:
 By now, you should have your Raspberry Pi computer completely set up, with a DAQ HAT. To continue, you will need: By now, you should have your Raspberry Pi computer completely set up, with a DAQ HAT. To continue, you will need:
   * some sort of DC Power Jack connector,    * some sort of DC Power Jack connector, 
 +{{:atmos:citation:instruments:setup_vaisala_temperature_and_humidity_probe:screenshot_2025-11-24_203842.png?100|}}
   * a small screwdriver for undoing and tightening the screws on the DAQ HAT channels,    * a small screwdriver for undoing and tightening the screws on the DAQ HAT channels, 
 +{{:atmos:citation:instruments:setup_vaisala_temperature_and_humidity_probe:screenshot_2025-11-24_203808.png?100|}}{{:atmos:citation:instruments:setup_vaisala_temperature_and_humidity_probe:screenshot_2025-11-24_203817.png?100|}}
 +
 Optionally: Optionally:
   * a multimeter/power sensor,    * a multimeter/power sensor, 
 +{{:atmos:citation:instruments:setup_vaisala_temperature_and_humidity_probe:screenshot_2025-11-24_204655.png?100|}}
   * some apparatus that can introduce humidity (e.g. a half-full gallon of water),    * some apparatus that can introduce humidity (e.g. a half-full gallon of water), 
   * and an apparatus that can introduce heat (e.g. a heat gun, or even your hand).   * and an apparatus that can introduce heat (e.g. a heat gun, or even your hand).
atmos/citation/instruments/setup_vaisala_temperature_and_humidity_probe/home.1764038419.txt.gz · Last modified: 2025/11/25 02:40 by ashley.vos