Atmos Wiki

User Tools

Site Tools

Trace: • july_1_2013 • july_17_2013 • may_20_2014 • july_30_2013 • july_1_2015
atmos:citation:instruments:setup_dracal_usb_barometer:home

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
atmos:citation:instruments:setup_dracal_usb_barometer:home [2026/02/20 01:10] – ashley.vosatmos:citation:instruments:setup_dracal_usb_barometer:home [2026/06/01 19:55] (current) – ashley.vos
Line 19: Line 19:
   - Plug the USB stick into an open port on your Raspberry Pi computer.   - Plug the USB stick into an open port on your Raspberry Pi computer.
   - Note that if you are using python, you should change the directory name from "DracalView_3.4.5" to "DracalView_3_4_5" to allow python to function.   - Note that if you are using python, you should change the directory name from "DracalView_3.4.5" to "DracalView_3_4_5" to allow python to function.
 +  - Update as of 2026.06.01
 +    - It is best to use serial mode with the Raspberry pi. Additionally, the code provided will only work for serial.
 +  - To switch to serial mode, see [[https://www.dracal.com/en/getting-started-with-vcp-mode/|Getting Started with VCP Mode: User on Linux]]
   - If you have properly set up the ADPAA and DAQ HAT, you can now run the python program that coincides with your instrument and observe the data.   - If you have properly set up the ADPAA and DAQ HAT, you can now run the python program that coincides with your instrument and observe the data.
  
atmos/citation/instruments/setup_dracal_usb_barometer/home.txt · Last modified: 2026/06/01 19:55 by ashley.vos