Differences

This shows you the differences between two versions of the page.

--- atmos:citation:instruments:raspberrypi_setup:home [2026/03/12 16:58] – delene
+++ atmos:citation:instruments:raspberrypi_setup:home [2026/03/12 17:50] (current) – delene
@@ Line 1: / Line 1: @@
 =====Intial Raspberry Pi Setup Instructions=====
 ====1. Change the hostname to TIMMS-SN00XXX. ====
-Example for TIMMS with a serial number SN00200 in the command line use "sudo vi /etc/hostname TIMMS-SN00200" without parentheses "sudo vi etc/hostname TIMMS-SN00200".
+Example for TIMMS with a serial number SN00200 in the command line use "sudo vi /etc/hostname TIMMS-SN00200" withou|t parentheses "sudo vi etc/hostname TIMMS-SN00200".
     - Alternate Method:
       - use command "sudo raspi-config"
@@ Line 10: / Line 10: @@
 ====2. WPA2 Network Setup ====
-  - [[https://www.securew2.com/documentation/general-help/wpa2-enterprise-certificates-raspberry-pi|WPA2 Raspbery Pi]]
+  - [[https://www.securew2.com/documentation/general-help/wpa2-enterprise-certificates-raspberry-pi|WPA2
+Raspbery Pi]]
+  - [[https://utsgdev.service-now.com/infocomm?id=kb_article_view&sysparm_article=KB0015341|Wired Setup]]
 ====3. Update the base raspberry pi software ====
   - Use the command "sudo apt-get update" to check available updates then "sudo apt upgrade" to perform the updates.  Example: sudo apt-get update