Differences

This shows you the differences between two versions of the page.

--- atmos:citation:instruments:e100:home [2026/03/25 18:10] – johansen
+++ atmos:citation:instruments:e100:home [2026/03/25 18:17] (current) – johansen
@@ Line 13: / Line 13: @@
   * Raspberry Pi + case
   * Electric Field Rotor (EFR)
-  * mounting plate for EFR
+  * Mounting plate for EFR
   * Power adapter for running EFR capable of outputting 29.5 Volts at 3 Amps
   * Male outlet plug x2
@@ Line 28: / Line 28: @@
   * Drill a hole in the bottom side (closest side to latch for door) of the enclosure the same size as the inner diameter of the mounting plate (cutting blade should be in clifford 423)
   * Remove old mounting plate from EFR if it is still attached and bent.
+      * Remove all 4 outer allen head screws on EFR
+      * Slide exterior casing off EFR
+      * Remove interior screws on mounting plate
+      * reassemble EFR casing and tighten all 4 allen head screws
   * Secure the mounting plate to the bottom of the enclosure using bolts and lock nuts (lock nuts should be inside of the enclosure)
   * Slide EFR into mounting plate (it may be necessary to file away parts of the enclosure to get the EFR into position)
@@ Line 51: / Line 55: @@
 {{:atmos:citation:instruments:e100:cliffordhall_e100_20250609_cropped.jpeg?400|}}
-{{:atmos:citation:instruments:e100:0801191509-electricfieldlocations.jpg?400|}}
 {{:atmos:citation:instruments:e100:img_0390.jpeg?400|}}