Differences

This shows you the differences between two versions of the page.

--- atmos:citation:instruments:e100:home [2026/02/13 16:21] – johansen
+++ atmos:citation:instruments:e100:home [2026/02/13 16:22] (current) – johansen
@@ Line 40: / Line 40: @@
   * Strip off one end on a new 18-20 AWG wire and add a ring terminal to the end
   * Cut the wire to 6 inches and strip the other end
-  * Loosen on of the 4 outer allen head screws on the top (inside the enclosure) of the EFR and secure the stripped end of the new wire to the loosened allen head and tighten it, tug on the wire to ensure it is secure
+  * Loosen one of the 4 outer allen head screws on the top (inside the enclosure) of the EFR and secure the stripped end of the new wire to the loosened allen head and tighten it, tug on the wire to ensure it is secure
   * Take the ring terminals of both wires and place them on the stud at the top of the enclosure near the door
   * The enclosure should have came with a yellow grounding cable that has ring terminals on both ends, locate this cable and place one end on the stud in the enclosure and the other end on the stud on the back of the door and place a nut on both studs