Differences

This shows you the differences between two versions of the page.

--- atmos:3dprinter:prusa [2026/07/28 16:43] – halmos
+++ atmos:3dprinter:prusa [2026/07/28 19:32] (current) – halmos
@@ Line 5: / Line 5: @@
 ===== Prusa Slicer =====
   * A slicer is the software used to turn the 3D model you want to print into "instructions" that the printer can read. The easiest software to use with the printer in our lab is called PrusaSlicer. The software is available for Windows, Mac, Linux, IOS, Android, etc. The setup process can be found here: https://www.prusa3d.com/p/prusaslicer/
-  *
+  * Prusa Connect is the software used to wirelessly send gcode files to the printer. Setup can be performed in the Prusa Slicer software.
 Important Information
@@ Line 12: / Line 12: @@
 ====== Printing Process ======
 ===== Inserting Filament =====
-  - First you should ensure that the proper filament is loaded.
+  - Ensure the proper filament is loaded.
+  - On the printer click Filament, and follow the instructions for what you would like to do. (Load, unload, etc.) Make sure you select the correct filament you are inserting, since this changes the required temperature of the hotend, bed, and enclosure.
-===== Cleaning the Bed =====
+===== Choosing / Cleaning the Bed =====
-===== Sending the File to the Printer =====
+  - Different materials require a different print bed. Currently the only bed we have is a smooth plate, which works great for PLA. If using PETG or other materials, reference Prusa's website for the proper bed plate to use.
+  - Ensure that you clean the bed with IPA Alcohol, and leave no fingerprints behind. Fingerprints will reduce adhesion on the bed and cause prints to separate / fail.
+  - Ensure that the bed is fully put in place to the locking mechanism.
+===== Sending the File to the Printer - USB =====
+  - Remove USB Stick from Printer
+  - Connect USB stick to computer and drag / drop GCode file to USB Stick
+  - Insert USB stick to printer
+  - Click "Print"
+  - Once print has completed, remove USB stick and delete GCode file.
+===== Sending the File to the Printer - Prusa Connect =====
+  - In Prusa Slicer, click "Send to prusa connect
 ===== Removing the Part =====
 ====== Switching Filament ======